Description
COMES WITH
1x Z Series Double Gang (Slave) Light Controller in White
1x Labels
1x Simple Instruction/ Installation Manual
CHECK OUT OUR VIDEO ON YOUTUBE
https://youtu.be/K_WPPzHayIY
FEATURES
1. Stylish Glass Front Touch Panel
2. Operate any light from any room
3. Control Lights with Elcop Remote
4. No additional cabling required
5. Simple to replace existing light switches or install new
6. Night Light
7. Australian Approved with SAA Certification
8. 3 Year Warranty
CONVENIENCE
The system consists of stylish touch screen wall switches that can be installed and programed in minutes without any additional wiring*. Just ask your electrician to swap the existing light switch with the new smart controller.
SIMPLICITY
The system allows you to control any number of lights from each wall switch or from your mobile app. You can start with just two controllers and program a single light, a whole room or a series of lights to suit your needs.
FUNCTIONALITY
The controllers are available in 1, 2 and 3 gang (switch) options that can each be programed to control multiple rooms or light sets. The master switch controls the slave units and both can be set by the IR remote control.
CONTROL
The system comes complete with an IR remote which allows you to program and control all your home lighting. The simple set up procedure allows you to change configurations or add additional lights, rooms or features at any time.
EASY INSTALLATION
The back of each controller unit is clearly marked for easy installation by your qualified electrician. Each switch has been quality approved and meets local electrical standards.
OVERVIEW
The Z Series Touch system consists of devices called Smart Controllers. These controllers simply replace your existing light switches using the existing electrical wiring throughout your home. By doing so, they are able to communicate with each other, allowing you the flexibility of operating any light in the house from any master controller in the house.
Once you have the Z Series controllers installed in your home you will be able to do the following;
- Turn off all lights in the house with a single touch
- Turn on multiple lights with a single touch
- Operate all lights via remote control
- Fully automate your lighting in less than a day
They offer functionality far greater than the conventional switch they replace. Each Z Series Smart Controller is controlled by its own microprocessor making use of power line carrier technology. This means that each Smart Controller can talk to any other Smart Controller through the home’s electrical wiring. This technology enables the user to control any light, or set of lights from any Smart Controller in the house.
WHAT YOU NEED TO KNOW
Master (Remote) Controller
The Master control acts as the primary unit for your home. Simply install the Master control as a replacement for your current light switch and program each button to a designated area in your home. The Master unit is capable of controlling any lights within a single room but also all connected lights within the house. For example, you can replace a 1-3 Gang switch and can program to control up to another 8 Lights to control from a single switch. Maximum of 11 lights can be controlled up to with these and you do not need a switch wire.
Non Remote (Slave) Controller
The Slave controller functions the same as a traditional light switch and is required to communicate with the Master unit. It also has the added benefit of being able to access all lighting points in your home via the IR remote control giving you total flexibility from any room. Note: Light (Slave) Controller do not control other lights . These are mainly used in Bathrooms, Wardrobes, Rooms, etc but can be controlled from Master remote controllers) Available up to 3 Gang.
NOTES
- You will need to get your electrician to install these units as you would with all electrical work. Instructions for installation is provided with every purchase.
- You will need a Elcop Remote to program the touch switches which we provide free of charge if you purchase 3 or more lights. Simple programming instructions are provided so programming is relatively simple.
- Both Master and Slave controllers are available in 1,2 & 3 Gang (switch) options.
- Switches can only communicate with each other when they are wired in the same phase. If your home is wired by 3 phase, when you install our 3 phase module, 1 and 3 phase switches communicate with each other. This is only required if you have 3 phase at your property and can be purchased separately for $110.00 from our store.
Reviews
There are no reviews yet.