1x Z Series Triple Gang Light Controller in Silver
1x Simple Instruction/ Installation Manual
COMES WITH 3 YEAR WARRANTY
AUSTRALIAN APPROVED WITH SAA CERTIFICATE
FREE TECHNICAL SUPPORT
CHECK OUT OUR VIDEO ON YOUTUBE
1. Glass Touch Panel
2. Operate many lights from 1 switch
3. No additional cabling
4. Easy to Install
5. Remote Controller
6. Night Light
7. IOS and Android Compatible
The Z Series Touch system consists of devices called Smart Controllers. These controllers simply replace your existing light switches. Using the electrical wiring throughout your home the controllers are able to communicate with each other, allowing you the flexibility of operating any light in the house from any controller in the house.
Once you have the Z Series controllers installed in your home you will be able to do the following -
Turn off all lights in the house with a single touch, Turn on multiple lights with a single touch, Operate all lights via remote control. Control power points, Program in a just a few minutes, Fully automate your lighting in less than a day
These controllers can easily replace any light switch in your home with no additional cabling required. They also offer functionality far greater than the conventional switch they replace. Each Z Series Smart Controller is controlled by its own microprocessor
making use of power line carrier technology. This means that each Smart Controller can talk to any other Smart Controller through the home’s electrical wiring. This technology enables the user to control any light, or set of lights from any Smart Controller in the house.
WHAT YOU NEED
A Light Controller (Controller that does not control other lights which are mainly used in Bathrooms, Wardrobes, Rooms, etc but can be controlled from remote controllers) They are available up to 3 Gang.
A Remote Light Controller (Able to Control several lights from 1 touch switch) We have the remote light controllers up to 3 Gangs. For example, you can replace a 1-3 Gang switch and can program to control up to another 8 Lights.
We than have a Master Remote Light Controller which controls up to 11 lights. You can control up to 11 lights with these and you do not need a switch wire.
You will need to get your electrician to install these units as you would with all electrical work. Instructions for installation is provided with every purchase.
You will need a Elcop Remote to program the touch switches which we provide free of charge if you purchase 3 or more lights. Simple programming instructions are provided so programming is relatively simple.
We have Mobile Apps for iPhone and Android so you can use to turn your lights on/off from anywhere in the world. For this, you will need to purchase an internet module for this.
Resistive Load 10A
ABS Plastic Backing
Up to 200M Power Line control range
1,000,000 X Touch Panel Life
Input Voltage 190 VAC-260 VAC
Dimensions: Length: 12.4CM Width: 09.CM Height: 8.5CM
NOTE: YOU WILL NEED TO PURCHASE A ELCOP REMOTE PROGRAMMER TO PROGRAM EACH Z SERIES SWITCH